Download Magic Partition Recovery v2.3 With Serial Keys and Restore Your Lost Data

Your Surface comes with Windows recovery information that allows you to refresh your device or reset it to its factory condition. This recovery information is stored in a dedicated recovery partition on your Surface.

Magic Partition Recovery v2.3 With Serial Keys

DOWNLOAD

Use the replicated storage levels if you want fast fault recovery (e.g. if using Spark to serverequests from a web application). All the storage levels provide full fault tolerance byrecomputing lost data, but the replicated ones let you continue running tasks on the RDD withoutwaiting to recompute a lost partition.

• Note: If you are willing to accept downtime, you can simply take all the brokers down, update the code and start all of them. They will start with the new protocol by default.Note: Bumping the protocol version and restarting can be done any time after the brokers were upgraded. It does not have to be immediately after.Potential breaking changes in 0.10.1.0 The log retention time is no longer based on last modified time of the log segments. Instead it will be based on the largest timestamp of the messages in a log segment.

• The log rolling time is no longer depending on log segment create time. Instead it is now based on the timestamp in the messages. More specifically. if the timestamp of the first message in the segment is T, the log will be rolled out when a new message has a timestamp greater than or equal to T + log.roll.ms

• The open file handlers of 0.10.0 will increase by 33% because of the addition of time index files for each segment.

• The time index and offset index share the same index size configuration. Since each time index entry is 1.5x the size of offset index entry. User may need to increase log.index.size.max.bytes to avoid potential frequent log rolling.

• Due to the increased number of index files, on some brokers with large amount the log segments (e.g. >15K), the log loading process during the broker startup could be longer. Based on our experiment, setting the num.recovery.threads.per.data.dir to one may reduce the log loading time.

• Upgrading a 0.10.0 Kafka Streams Application Upgrading your Streams application from 0.10.0 to 0.10.1 does require a broker upgrade because a Kafka Streams 0.10.1 application can only connect to 0.10.1 brokers.

• There are couple of API changes, that are not backward compatible (cf. Streams API changes in 0.10.1 for more details). Thus, you need to update and recompile your code. Just swapping the Kafka Streams library jar file will not work and will break your application.

• Upgrading from 0.10.0.x to 0.10.1.2 requires two rolling bounces with config upgrade.from="0.10.0" set for first upgrade phase (cf. KIP-268). As an alternative, an offline upgrade is also possible. prepare your application instances for a rolling bounce and make sure that config upgrade.from is set to "0.10.0" for new version 0.10.1.2

• bounce each instance of your application once

• prepare your newly deployed 0.10.1.2 application instances for a second round of rolling bounces; make sure to remove the value for config upgrade.from

• bounce each instance of your application once more to complete the upgrade

• Upgrading from 0.10.0.x to 0.10.1.0 or 0.10.1.1 requires an offline upgrade (rolling bounce upgrade is not supported) stop all old (0.10.0.x) application instances

• update your code and swap old code and jar file with new code and new jar file

• restart all new (0.10.1.0 or 0.10.1.1) application instances

• Notable changes in 0.10.1.0 The new Java consumer is no longer in beta and we recommend it for all new development. The old Scala consumers are still supported, but they will be deprecated in the next release and will be removed in a future major release.

• The --new-consumer/--new.consumer switch is no longer required to use tools like MirrorMaker and the Console Consumer with the new consumer; one simply needs to pass a Kafka broker to connect to instead of the ZooKeeper ensemble. In addition, usage of the Console Consumer with the old consumer has been deprecated and it will be removed in a future major release.

• Kafka clusters can now be uniquely identified by a cluster id. It will be automatically generated when a broker is upgraded to 0.10.1.0. The cluster id is available via the kafka.server:type=KafkaServer,name=ClusterId metric and it is part of the Metadata response. Serializers, client interceptors and metric reporters can receive the cluster id by implementing the ClusterResourceListener interface.

• The BrokerState "RunningAsController" (value 4) has been removed. Due to a bug, a broker would only be in this state briefly before transitioning out of it and hence the impact of the removal should be minimal. The recommended way to detect if a given broker is the controller is via the kafka.controller:type=KafkaController,name=ActiveControllerCount metric.

• The new Java Consumer now allows users to search offsets by timestamp on partitions.

• The new Java Consumer now supports heartbeating from a background thread. There is a new configuration max.poll.interval.ms which controls the maximum time between poll invocations before the consumer will proactively leave the group (5 minutes by default). The value of the configuration request.timeout.ms (default to 30 seconds) must always be smaller than max.poll.interval.ms(default to 5 minutes), since that is the maximum time that a JoinGroup request can block on the server while the consumer is rebalance. Finally, the default value of session.timeout.ms has been adjusted down to 10 seconds, and the default value of max.poll.records has been changed to 500.

• When using an Authorizer and a user doesn't have Describe authorization on a topic, the broker will no longer return TOPIC_AUTHORIZATION_FAILED errors to requests since this leaks topic names. Instead, the UNKNOWN_TOPIC_OR_PARTITION error code will be returned. This may cause unexpected timeouts or delays when using the producer and consumer since Kafka clients will typically retry automatically on unknown topic errors. You should consult the client logs if you suspect this could be happening.

• Fetch responses have a size limit by default (50 MB for consumers and 10 MB for replication). The existing per partition limits also apply (1 MB for consumers and replication). Note that neither of these limits is an absolute maximum as explained in the next point.

• Consumers and replicas can make progress if a message larger than the response/partition size limit is found. More concretely, if the first message in the first non-empty partition of the fetch is larger than either or both limits, the message will still be returned.

• Overloaded constructors were added to kafka.api.FetchRequest and kafka.javaapi.FetchRequest to allow the caller to specify the order of the partitions (since order is significant in v3). The previously existing constructors were deprecated and the partitions are shuffled before the request is sent to avoid starvation issues.

• New Protocol Versions ListOffsetRequest v1 supports accurate offset search based on timestamps.

• MetadataResponse v2 introduces a new field: "cluster_id".

• FetchRequest v3 supports limiting the response size (in addition to the existing per partition limit), it returns messages bigger than the limits if required to make progress and the order of partitions in the request is now significant.

• JoinGroup v1 introduces a new field: "rebalance_timeout".

Upgrading from 0.8.x or 0.9.x to 0.10.0.00.10.0.0 has potential breaking changes (please review before upgrading) and possible performance impact following the upgrade. By following the recommended rolling upgrade plan below, you guarantee no downtime and no performance impact during and following the upgrade.Note: Because new protocols are introduced, it is important to upgrade your Kafka clusters before upgrading your clients.

The configuration controls how long the KafkaProducer's send(), partitionsFor(), initTransactions(), sendOffsetsToTransaction(), commitTransaction() and abortTransaction() methods will block. For send() this timeout bounds the total time waiting for both metadata fetch and buffer allocation (blocking in the user-supplied serializers or partitioner is not counted against this timeout). For partitionsFor() this timeout bounds the time spent waiting for metadata if it is unavailable. The transaction-related methods always block, but may timeout if the transaction coordinator could not be discovered or did not respond within the timeout.

Converter class used to convert between Kafka Connect format and the serialized form that is written to Kafka. This controls the format of the keys in messages written to or read from Kafka, and since this is independent of connectors it allows any connector to work with any serialization format. Examples of common formats include JSON and Avro.

Topics are added and modified using the topic tool: > bin/kafka-topics.sh --bootstrap-server broker_host:port --create --topic my_topic_name \ --partitions 20 --replication-factor 3 --config x=y The replication factor controls how many servers will replicate each message that is written. If you have a replication factor of 3 then up to 2 servers can fail before you will lose access to your data. We recommend you use a replication factor of 2 or 3 so that you can transparently bounce machines without interrupting data consumption. The partition count controls how many logs the topic will be sharded into. There are several impacts of the partition count. First each partition must fit entirely on a single server. So if you have 20 partitions the full data set (and read and write load) will be handled by no more than 20 servers (not counting replicas). Finally the partition count impacts the maximum parallelism of your consumers. This is discussed in greater detail in the concepts section. Each sharded partition log is placed into its own folder under the Kafka log directory. The name of such folders consists of the topic name, appended by a dash (-) and the partition id. Since a typical folder name can not be over 255 characters long, there will be a limitation on the length of topic names. We assume the number of partitions will not ever be above 100,000. Therefore, topic names cannot be longer than 249 characters. This leaves just enough room in the folder name for a dash and a potentially 5 digit long partition id. The configurations added on the command line override the default settings the server has for things like the length of time data should be retained. The complete set of per-topic configurations is documented here. Modifying topics You can change the configuration or partitioning of a topic using the same topic tool. To add partitions you can do > bin/kafka-topics.sh --bootstrap-server broker_host:port --alter --topic my_topic_name \ --partitions 40 Be aware that one use case for partitions is to semantically partition data, and adding partitions doesn't change the partitioning of existing data so this may disturb consumers if they rely on that partition. That is if data is partitioned by hash(key) % number_of_partitions then this partitioning will potentially be shuffled by adding partitions but Kafka will not attempt to automatically redistribute data in any way. To add configs: > bin/kafka-configs.sh --bootstrap-server broker_host:port --entity-type topics --entity-name my_topic_name --alter --add-config x=y To remove a config: > bin/kafka-configs.sh --bootstrap-server broker_host:port --entity-type topics --entity-name my_topic_name --alter --delete-config x And finally deleting a topic: > bin/kafka-topics.sh --bootstrap-server broker_host:port --delete --topic my_topic_name Kafka does not currently support reducing the number of partitions for a topic. Instructions for changing the replication factor of a topic can be found here. Graceful shutdown The Kafka cluster will automatically detect any broker shutdown or failure and elect new leaders for the partitions on that machine. This will occur whether a server fails or it is brought down intentionally for maintenance or configuration changes. For the latter cases Kafka supports a more graceful mechanism for stopping a server than just killing it. When a server is stopped gracefully it has two optimizations it will take advantage of: It will sync all its logs to disk to avoid needing to do any log recovery when it restarts (i.e. validating the checksum for all messages in the tail of the log). Log recovery takes time so this speeds up intentional restarts. It will migrate any partitions the server is the leader for to other replicas prior to shutting down. This will make the leadership transfer faster and minimize the time each partition is unavailable to a few milliseconds. Syncing the logs will happen automatically whenever the server is stopped other than by a hard kill, but the controlled leadership migration requires using a special setting: controlled.shutdown.enable=true Note that controlled shutdown will only succeed if all the partitions hosted on the broker have replicas (i.e. the replication factor is greater than 1 and at least one of these replicas is alive). This is generally what you want since shutting down the last replica would make that topic partition unavailable. Balancing leadership Whenever a broker stops or crashes, leadership for that broker's partitions transfers to other replicas. When the broker is restarted it will only be a follower for all its partitions, meaning it will not be used for client reads and writes. To avoid this imbalance, Kafka has a notion of preferred replicas. If the list of replicas for a partition is 1,5,9 then node 1 is preferred as the leader to either node 5 or 9 because it is earlier in the replica list. By default the Kafka cluster will try to restore leadership to the preferred replicas. This behaviour is configured with: auto.leader.rebalance.enable=true You can also set this to false, but you will then need to manually restore leadership to the restored replicas by running the command: > bin/kafka-leader-election.sh --bootstrap-server broker_host:port --election-type preferred --all-topic-partitions Balancing Replicas Across Racks The rack awareness feature spreads replicas of the same partition across different racks. This extends the guarantees Kafka provides for broker-failure to cover rack-failure, limiting the risk of data loss should all the brokers on a rack fail at once. The feature can also be applied to other broker groupings such as availability zones in EC2. 2ff7e9595c